Additional Images
KSC-PSW7EQ
Powered Enclosure Subwoofer with Active EQ Technology
The compact die-cast enclosure allows installation almost anywhere, including tight spaces such as under a seat or panel. Features the built-in high efficiency class-D amplifier, 200 x 130mm aluminum diaphragm with micro-step shape reinforcement. This micro-step suppresses the unwanted movement of the diaphragm and reproduces accurate and powerful bass sound. The newly developed ACTIVE EQ TECHNOLOGY with three types of bass curves, to match the music of various genres, delivers super-live sound experience . With the wired remote you have full control of the powered subwoofer.
Key Features
| 160W Maximum output power for deep and intense bass sound. |
| ACTIVE EQ TECHNOLOGY with three types of bass to match the music of various genres. |
| 200 x 130mm Aluminum woofer cone with micro-step shape diaphragm surrounding. |
| High efficiency class-D amplifier for rich and clean bass sound. |
| Wired remote with Power indicator, Active EQ switch, Volume & Frequency contr. & phase switch. |
| Line-in & speaker level input with signal sensing turn-on. |
| Compact aluminum die-cast enclosure (280 x 70 x 220mm). |
| Connection cables and Installation brackets included. |
Speaker Features
| Speaker System | Active subwoofer system |
| Maximum Output Power | 160 W |
| Speaker Size | 200 x 130mm |
| Wired remote included | Yes |
| Amplifier Included | Built-in |
| Enclosure type | Aluminum die-cast |
| Enclosure size (BxHxD) | 350 x 75 x 240 mm |
| Enclosure net weight | 2,6 kg |
Amplifier Features
| Class D Amplifier | Yes |
| Maximum power output | 160W |
| Low-pass Filter | Yes |
| Phase inverter 0°(Normal) / 180°(Reverse) | Yes |
| Built-in Equalizer | Yes |
| Power Indicator | Yes |
| Signal Sensing Turn-on | Yes |
| Line in | RCA |
| Speaker level Input | Yes |
| Chassis | Aluminum Die-cast |
| Yes | |
| Wired Remote Support | Power indicator / Volume / Active EQ / Frequency / Phase |
Speaker/woofer Specifications
| Woofer Cone material | Aluminum |
| Woofer cone dimensions | 200 x 130mm |
| Speaker Surround | High-roll urethane |
| Sensitivity | 89dB/W/m |
| Frequency Response | 40Hz ~ 200Hz |
| Speaker Impedance | 1Ω |
Amplifier-Specifications
| Maximum power output (4Ω) | 160W x 1 |
| Low-pass Filter | 50Hz ~125Hz (-18dB) |
| Line-in Sensitivity | 20 mV |
| Speaker Input Sensitivity | 400 mV |
| Line-in Impedance | 22 kΩ |
| Speaker Input Impedance | 10 kΩ |
| Signal to Noise Ratio | 90dB |
| Frequency response (+0dB, -3dB) | 35Hz ~ 150Hz |
| Operating voltage | 14,4V (11V ～ 16V allowable) |
| Maximum current consumption | 5,9A |
Accessories
| Bracket | Type1 x 1, type2 x1 |
| Remote control | Wired remote (5.0m) |
| 10-pin connector cord (5.0m) | |
| Speaker cord: (4.3m) | |
| Double side adhesive tape for remote control | |
| Screws (Parker-type) | Ø 5 x 12mm, 2 pieces |
| Screws (Parker-type) | Ø 3 x 10mm, 2 pieces |
| Screws (Parker-type) | Ø 5 x 16mm, 2 pieces |